RE: GMC Sierra & Commercial Dealer, here to answer any questions I can

Printable Version

Truck Forums >> GMC Truck Forums >> GMC Sierra Forum >> RE: GMC Sierra & Commercial Dealer, here to answer any questions I can

Page: <<   < prev  4 5 6 7 [8]

Login Message << Older Topic   Newer Topic >>

RE: GMC Sierra & Commercial Dealer, here to answer any ... - 6/24/2008 12:23:46 PM    jimm451   Posts: 1 Joined: 6/24/2008 Status: offline I am new to the forum, trying to get some informaiton on the Sierra 3500 DRW. I''ve looked at the GMC website to get towing capacities, but I am still confused. I am hauling a 5th wheel now with a Chevy 2500HD. Suspension-wise I am fine, but have too small an engine to pull over even an overpass without kicking into passing gear and just about jacking the front end off the ground. I have decided on the 3500 DRW for safety (I like the dual rear wheels). Now I need to know which engine can pull what amount. My trailer is about 15K loaded, but I may trade up to something larger, 18K or so in the distant future. Can you simply list the engines and towing capacities for me? I would be buying a 2008 or 2009 new. Thanks < Message edited by jimm451 -- 6/24/2008 8:00:39 PM > (in reply to GoodGMC) Post #: 71

RE: GMC Sierra & Commercial Dealer, here to answer any ... - 7/7/2008 6:03:36 PM    vanspek   Posts: 2 Joined: 2/12/2008 Status: offline Hey Ryan Just wondering if you guys are experiencing any rusting bumpers.  I bought an 07 Sierra that the service manager drove, had 13,000km on it and bumpers were replaced when I bought it because they were damaged (dented).   4 months later they are starting to rust and they are saying its normal wear.   Have you experienced anything like this?  Anything else I should do?  I have contacted GM Canada but they said no recalls yet.  (I''m in Ontario). Thanks vanspek (in reply to GoodGMC) Post #: 72

RE: GMC Sierra & Commercial Dealer, here to answer any ... - 8/20/2008 8:39:02 AM    kletuspse11   Posts: 11 Joined: 5/25/2007 Status: offline I have a 1992 GMC Sierra 1500 stepside that I''m looking to convert to a 4X4 from a 4X2. I''m wondering what GM trucks I can start looking for as a parts truck that would match my trucks chassis and wouldn''t be too involved in swapping the chassis'' out. I don''t really want to do any cutting or welding if I don''t have to. Please let me know which trucks I can start looking at. Thanks (in reply to GoodGMC) Post #: 73

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Top 10 Posters
argon 2181 jcbst12 1838 72charger 1714 smoke20 1701 rxsteven 1408 hunt4game29 1023 stopspazinou 917 chevy112488 836 mrlm7 825 cracker 621

New Vendors
AMSOIL - Performance Oil Technology