Streakn
Posts: 29
Joined: 9/4/2007
Status: offline
|
Drill through the firewall and ( very important ) put in a grommet, run your wire under kick panels or remove seat and go under carpet. Keep your ground as short as possible, the bolt on the back of a seat works great. Make sure your subs are phased together, working off of bridged pos. run to (1st) sub. coming off of neg.(1st) go to pos.(2nd) run speaker wire from (2nd) back to bridged neg. This will loop subs phasing them together, without the phase they will fight each other lowering bass quality.
|
Printable Version
1994 chev s10 amp hook up - 
