Truck Forums   Truck Classifieds   Photo Gallery   Member List   Calendars   Search   Contact TF  
  News   Sponsors   Forum FAQ   Recalls   TSBs   Timeslips   Register   Login

350 engine, can't find a starter

  Printable Version
Truck Forum >> GMC Truck Forums >> General Tech >> 350 engine, can't find a starter Page: [1]
Login
Message << Older Topic   Newer Topic >>
350 engine, can't find a starter - 10/24/2007 9:19:44 AM   
Thraxxx

 

Posts: 13
Joined: 8/14/2007
Status: offline
Hello,

I bought a 350 engine for my 89 Sierra.  The engine that I got is carb'd and we are swapping it over to TBI.  Basically the problem we are having is that this engine didn't come with a starter.  I was going to use my old starter off of the 305 however it won't mesh up to the ring gear.  The ring gear on the 305 is 11" where the one on the 350 is 14" (168 teeth).  I went to our local parts shop to get a starter and the one they gave me won't mesh either.  We were going to use the 305 ring and starter however it won't bolt to the 350 block.  I asked dude where he got the engine from and he said a 1985 Camaro however in 85 the camaro's never came stock with a 350.  Looking for some ideas as to what I can do here.  Any advice would be greatly apreciated.

_____________________________

1989 GMC Sierra SL, 305 TBI, Automatic 700R4
1988 Pontiac TransAm, 305 TBI, Automatic 700R4
1994 Volkswagon Golf, 1.8L, 5 speed
2001 Ford Focus, 2.0L, 5 Speed
Post #: 1
RE: 350 engine, can't find a starter - 10/24/2007 4:22:05 PM   
Argon


Posts: 2181
Joined: 2/25/2007
Status: offline
man,not sure...just keep trying...maybe a starter for an 85 p/u?

(in reply to Thraxxx)
Post #: 2
RE: 350 engine, can't find a starter - 12/14/2007 8:38:56 AM   
stopspazinout


Posts: 917
Joined: 4/23/2007
Status: offline
yea try a starter from an 85 p/u i was able to reuse my flywheel from my 305 to 350 swap so id say you probably did get an older model 350 in which case youll need an older starter.

_____________________________

89 silverado new 5.7, rebuilt700R4, RCLB Debadged, 16x8 torque 2s in LT265/75/16 BFGS, 2.73s , opened up intake, airade tb spacer, headers with dual high flow cats and 40 series dumped, audiobahn spkers with memphis 10s to a rockford amp.

(in reply to Argon)
Post #: 3
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Truck Forum >> GMC Truck Forums >> General Tech
Jump to:



Featured Sponsors
Advertising Info

Top 10 Posters
argon2181
jcbst121838
72charger1714
smoke201701
rxsteven1408
hunt4game291023
stopspazinou917
chevy112488836
mrlm7825
cracker621

New Vendors
AMSOIL - Performance Oil Technology