1972 chev c-10
Login  | |
|
1972 chev c-10 - 11/4/2006 4:58:49 PM
|
|
|
macmike21
Posts: 2
Joined: 11/4/2006
Status: offline
|
i resored and converted a 1972 chev c-10 long bed from manual to automatic trans ,350 3 speed. ever since then at about 45-55 miles per hour i get a vibration. the drive shaft was cut and rebalanced to fit. the front end has been alighned and the tires are new and balanced.i measured and centered the carrier bearing and lined up the u-joint yokes. but i still get the vibration. the whole truck vibrates not just the front end. any ideas would surely be appreciated. thanks.
|
|
|
|
|
|
RE: 1972 chev c-10 - 2/16/2007 3:31:46 AM
|
|
|
MrLM7
Posts: 825
Joined: 1/6/2007
Status: offline
|
Check your wheel balancing.
_____________________________
2002 Silverado ecsb 2wd 5.3 4L60E 3.73's G80, headers, tbs, 160 degree tstat, redneck ram-air, dumped exhaust, throttle body bypass, air gap, descreened MAF, 255/65R16, Royal Purple Fluids, A/F gauge, efans Wheatley Tune more. 14s in 1/4
|
|
|
|
|
Printable Version
