been having some serious current draws whenever using my blower motor. then this morning turned it on and nothing. now draw, no noises. just nothing. any ideas where to start lookin?

 

first...with key on and blower on,knock the crap out of it and see if she comes on...

no good?..grab a test light and see if the purple wire at the motor is hot...

also...on that 89...there is a big red and black wires connector sort of under the blower...find it and unplug that connector and see if she's burnt up

 

well, tappin the blower motor case from the inside got it to kick back on. i did this a couple cycles and it works for the time being. but its stillhas a large current draw. it goes from about 14 volts to around 10. i saw the harness with the purple wires by the case. but i didnt see the one with red wires.