Still having problems
 

I still have air in my master cylinder.I have bench bleed the m/c.Bleed all the brakes starting at the right rear.3 m/c's 2 1/2 gallons of brake fluid.All is good at this time,until I drove it.Then there's air again in the m/c and brakes are spongy again.So many air bubbles that the fluid turns a milky color.Until all the air bubbles pop and then it back to normal.But brakes still spongy.Is there a tool out there that will pull a vaccum so I can tell if I have a leak.ANY HELP PLEASE.