Hello All new here. I have a 2001 3500 Dually. my brother was helping me replace the 3 brake lines from the ABS booster, all 3 were rusted badly anyway. When he took them off he can't remember how they were ran /from were to were. I have it ran like this. Looking down at the abs booster. the front of truck is to my left. the first line from left to right is ran to the driver side brake calbr. the middle line is ran to a t-block mounted on frame and the right line is ran to the last block mounted on frame. when i start the truck to test the abs and brake lights can and stayed on even after i bled the l and r sides. where did i go wrong? Thanks for any help.