'07-'10 Chevrolet Silverado 1500 4x4 Regular Cab 2D
#1
07-30-2010, 01:48 PM
'07-'10 Chevrolet Silverado 1500 4x4 Regular Cab 2D
Hello ALL:
My name is Michael Caldarelli and I work for Talas Engineering, an engineering consulting firm specializing in Accident Reconstruction, Biomechanical Analysis, and Design Analysis. We are located in Hayward, CA, by the San Mateo Bridge.
We currently require a '07-'10 Chevrolet Silverado 1500 4x4 Regular Cab 2D for a simple photo inspection to be performed at our facility in Hayward as soon as possible. Our analysis for this case requires us to take measurements and photos of the exterior of the vehicle in order to create a 3-D computer model. This inspection would be performed by trained professionals and would not involve driving the vehicle in any way. Our inspection would take approximately 3-4 hours and you are more than welcome to stay and watch. We would pay you $100.00 - $150.00 per hour for your time.
We are located in Hayward, CA, very close to the San Mateo Bridge. Ideally the inspection would be done ASAP.
Please feel free to contact me if you are interested or if you have any questions or concerns. Thank you for your consideration.
Thank you and best regards,
Michael Caldarelli, B.A.
Talas Engineering, Inc.
26291 Production Ave., Suite 3
Hayward, CA 94545
510-723-1130 (main)
510-723-1129 (direct)
510-723-1139 (fax)
www.talasinc.com
My name is Michael Caldarelli and I work for Talas Engineering, an engineering consulting firm specializing in Accident Reconstruction, Biomechanical Analysis, and Design Analysis. We are located in Hayward, CA, by the San Mateo Bridge.
We currently require a '07-'10 Chevrolet Silverado 1500 4x4 Regular Cab 2D for a simple photo inspection to be performed at our facility in Hayward as soon as possible. Our analysis for this case requires us to take measurements and photos of the exterior of the vehicle in order to create a 3-D computer model. This inspection would be performed by trained professionals and would not involve driving the vehicle in any way. Our inspection would take approximately 3-4 hours and you are more than welcome to stay and watch. We would pay you $100.00 - $150.00 per hour for your time.
We are located in Hayward, CA, very close to the San Mateo Bridge. Ideally the inspection would be done ASAP.
Please feel free to contact me if you are interested or if you have any questions or concerns. Thank you for your consideration.
Thank you and best regards,
Michael Caldarelli, B.A.
Talas Engineering, Inc.
26291 Production Ave., Suite 3
Hayward, CA 94545
510-723-1130 (main)
510-723-1129 (direct)
510-723-1139 (fax)
www.talasinc.com
Thread
Thread Starter
Forum
Replies
Last Post
micro368
Chevy Silverado/ GMC Sierra Forum
0
03-09-2011 01:35 PM
Talas Engineering Inc
New Member Area
0
07-30-2010 01:41 PM
lovesexy
Vehicles for Sale
0
04-05-2008 12:03 AM
