Exhaust Recommendation
#1
Exhaust Recommendation
Hey guys Newbie here... Before I ask the Q, yes I did a search. It just gets too many hits to be useful...
Anyway, I have an '02 with the 5.3L and want to upgrade the exhaust to something that sounds aggressive, is a little louder than stock and thats it...
Any suggestions out there?
Sean
Anyway, I have an '02 with the 5.3L and want to upgrade the exhaust to something that sounds aggressive, is a little louder than stock and thats it...
Any suggestions out there?
Sean
#2
RE: Exhaust Recommendation
I'd go with a flowmaster dual cat-backsystem. What ever you do stay away from Summit Racing brand exhaust. They are the cheapest and it shows in crappy sound and quality. I made that mistake . Someone with insane knowledge on the subjectwill be here shortly to help you...lol
#3
RE: Exhaust Recommendation
Im running flowmaster exhaust with 40 series muffler. Its got a good sound to it, not to loud, but you can hear it. Flowmaster also makes one louder, the super 44 which is pretty damn loud. But if your looking for something thats got a good sound to it but isnt that loud, id recommend the 40 series.
#5
RE: Exhaust Recommendation
ORIGINAL: stevieGx33
i have the magnaflow dual catback system. in combo with the k&n cold air intake, it has a low rumble flowmaster doesnt have. its not too loud, but not exactly quiet either.
i have the magnaflow dual catback system. in combo with the k&n cold air intake, it has a low rumble flowmaster doesnt have. its not too loud, but not exactly quiet either.
#7
RE: Exhaust Recommendation
I've got mine running out the side in front of the back right tire and I assure you it doesn't sound like your buddies. Don't know why but it is quite a bit louder than most of the Silverados with Flowmasters around here. I still need to get headers though... uncork it a bit.
#8
RE: Exhaust Recommendation
RollingThunders guide to the $13 redneck Exhaust system.
Needed Equipment;
Cut-off Tool
Welder
Tape Measure
1. Measure Length of muffler plus 4 inches.
2. Go to Exhaust shop and have them cut you a piece of pipe that lenght, also have them flare the ends for you.
3. Cut Muffler out.
4. Weld in pipe.
Sounds GREAT!!!!
Needed Equipment;
Cut-off Tool
Welder
Tape Measure
1. Measure Length of muffler plus 4 inches.
2. Go to Exhaust shop and have them cut you a piece of pipe that lenght, also have them flare the ends for you.
3. Cut Muffler out.
4. Weld in pipe.
Sounds GREAT!!!!
#10
RE: Exhaust Recommendation
ORIGINAL: rollingthunder
RollingThunders guide to the $13 redneck Exhaust system.
Needed Equipment;
Cut-off Tool
Welder
Tape Measure
1. Measure Length of muffler plus 4 inches.
2. Go to Exhaust shop and have them cut you a piece of pipe that lenght, also have them flare the ends for you.
3. Cut Muffler out.
4. Weld in pipe.
Sounds GREAT!!!!
RollingThunders guide to the $13 redneck Exhaust system.
Needed Equipment;
Cut-off Tool
Welder
Tape Measure
1. Measure Length of muffler plus 4 inches.
2. Go to Exhaust shop and have them cut you a piece of pipe that lenght, also have them flare the ends for you.
3. Cut Muffler out.
4. Weld in pipe.
Sounds GREAT!!!!
needed tools: hacksaw, sawzall, etc.
1. cut off in front of muffler.
2. remove pipe.
sounds... well... its a personal thing lol but its 60 percent of the exhaust around here