Chevy Silverado/ GMC Sierra Forum Discuss the Chevrolet Silverado and GMC Sierra here.
Sponsored by:
Sponsored by:

Finally got a response from Hypertech...

Thread Tools
 
Search this Thread
 
  #1  
Old 10-22-2007, 07:40 AM
jcbst12's Avatar
Senior Member
Thread Starter
Join Date: Jul 2007
Location:
Posts: 1,855
Default Finally got a response from Hypertech...

This it what they told me........(they gave me a dyno sheet and I can post it if you guys want).

Our tuning like most all the other mfg's products are designed around a stock vehicle. Diablo or any other mfg will not get more power than Hypertech regardless of what one reads on some Forum. [/align] Our tuning is designed around a stock vehicle, there is no problem with a cat back exhaust and/or a replacement high flow air filter. Other mods like air intakes, after market mass air flow sensors, headers, high flow cats, larger throttle body, spacersetc should not be used with our tuning. When doing so the engine will be apt to ping/detonate and/or no power gain.[/align] The attached dyno chart shows the power gainfor both our 87 or 91 octane settings. As alwaysour test vehicle was completely stock. Thanks[/align] Jim
 
  #2  
Old 10-29-2007, 03:35 PM
Join Date: Jul 2007
Location:
Posts: 621
Default RE: Finally got a response from Hypertech...

I would like to see the sheet they gave you, please.
 
  #3  
Old 10-29-2007, 05:57 PM
Join Date: Jul 2007
Location:
Posts: 321
Default RE: Finally got a response from Hypertech...

Aye ...I would as well.

Damn ...when did I start talking like a pirate?!?!? Shiver me timbers!
 
  #4  
Old 10-29-2007, 06:57 PM
Join Date: Jul 2007
Location:
Posts: 621
Default RE: Finally got a response from Hypertech...

Um.....Marine Corp
Yes, Sir....No, Sir...Aye, Sir
 
  #5  
Old 10-29-2007, 07:46 PM
Join Date: Jul 2007
Location:
Posts: 321
Default RE: Finally got a response from Hypertech...

Nah, the police academy broke me of Marine Corps lingo ....I'm a pirate I tell you .....a bloomin' pirate!!
 
  #6  
Old 10-29-2007, 09:40 PM
Join Date: Jul 2007
Location:
Posts: 621
Default RE: Finally got a response from Hypertech...

You don't "put a cover on your grape" from your "ditty bag" full of "scuttlebutt" when your "good to go"? It all got got replaced once you were 10-8with the PD?....10-4. Do you ever get confused and sound like a Juliet Alpha?

I know 10 codes vary...10-8 is "ready, prepared, good to go" in Orangeburg, SC.
 
  #7  
Old 10-30-2007, 09:51 AM
Join Date: Jul 2007
Location:
Posts: 321
Default RE: Finally got a response from Hypertech...

The hardest thing for me to break was the ABC's ...

Marine Corps: Alpha, Bravo, Charlie ...

Police: Adam, Boy, Charlie

When I got to the academy, I did say aye,aye ....but I was forced to try to push the earth down (push ups)so much that I stopped.

I was a radio operator in the Corps, so that phonetic alphabet was second nature. When I was still in law enforcement, I still used the military phonetic alphabet at times ... a lot of people did ...it's always obvious who was military and who wasn't in LE.

The cabinet where I keep all my cleaning supplies at home is the whiskey locker ...and I tell my sons to get there "trash off the deck" from time-to-time.
 
  #8  
Old 10-30-2007, 09:52 AM
Join Date: Jul 2007
Location:
Posts: 321
Default RE: Finally got a response from Hypertech...

And yea ...10-8 is I'm ready ...10-7 is time to go get some grub. (I almost wrote chow). lol
 
  #9  
Old 10-30-2007, 10:46 AM
jcbst12's Avatar
Senior Member
Thread Starter
Join Date: Jul 2007
Location:
Posts: 1,855
Default RE: Finally got a response from Hypertech...

If you guys PM me your email addresses I'll send the dyno sheet it to you. They gave it to me as a .pdf file and thats not supported on here.
 
  #10  
Old 10-30-2007, 11:00 AM
Join Date: Jul 2007
Location:
Posts: 321
Default RE: Finally got a response from Hypertech...

PM sent
 


Quick Reply: Finally got a response from Hypertech...



All times are GMT -5. The time now is 03:40 PM.