Pictures of your ride or rides!!!!!!
#414
#418
the retainer clips are pretty simple to get out with a flat tip screw driver.
You can reach in and release the bow tie from the inside. There are two
tabs that press and release on the back side of it. It's easier to work with
off the vehicle. I taped off the black border then scuffed it up with fine
sand paper then sprayed it with duplicolor rattle can. The back one had to
stay on the tailgate, so I just taped it off then sprayed it. I let it sit a few
hours then sprayed it with Duplicolor clear coat. It was pretty simple,
good luck.
#419
I'm new
hi everyone i'm new to the forum, and well this are my rides, well i only have the truck now
http://c1.ac-images.myspacecdn.com/i...8ca78a1b90.jpg
http://c3.ac-images.myspacecdn.com/i...73303257a2.jpg
http://c1.ac-images.myspacecdn.com/i...8ca78a1b90.jpg
http://c3.ac-images.myspacecdn.com/i...73303257a2.jpg