Turn Signal Switch and Harness connector were cut
#1
Turn Signal Switch and Harness connector were cut
I'm working on a 1998 GMC Sierra 4.3L which someone has performed surgery on the Turn Signal Switch/Factory Harness wiring. They cut the three connectors off of the Turn Signal Switch assembly and the factory harness and wired it back together with butt connectors. The hazards and the left turn signles work but the right do not (remember the hazards work) and the right headlight turns on with the ignition on. I'm looking for a pinout of the turn signal switch connectors and the wire color of the factory harness.
Thread
Thread Starter
Forum
Replies
Last Post