hi, i have a 00 silverado and wondering how to program remote key fob anyone???

thanks dave

 

[ol]Start with the ignition OFF, hold down the power unlock button on the door panel. Turn ignition key ON, OFF, ON, OFF. Release power unlock button on the door panel. The locks will cycle once.
Hold down the keyless entry transmitter LOCK and UNLOCK buttons for 15 seconds. The locks will again cycle once.
Repeat step #2 for each additional keyless entry transmitter.
Turn the ignition on to exit the keyless entry transmitter programming mode. Programming is now complete. [/ol]

 

We carry a large selections of keyless entry remotes for most makes and models. If you need to just order the instructions please check our website at http://www.carandtruckremotes.com/pr...tructions.html
If you have any more questions or have any specific inquiries about programming your vehicle please contact us at customercare@carandtruckremotes.com including year, make and model of your vehicle.

You can also view our FAQ page for answers to common questions. Link below http://www.carandtruckremotes.com/faq.html

Best Regards Customer Care http://www.carandtruckremotes.com http://www.newkeylessremotes.com http://www.keylessentrystore.com

 

Hi
If you need to just order the instructions please check our website at http://www.carandtruckremotes.com/pr...tructions.html
If you have any more questions or have any specific inquiries about programming your vehicle please contact us at customercare@carandtruckremotes.com including year, make and model of your vehicle.
You can also view our FAQ page for answers to common questions. Link below http://www.carandtruckremotes.com/faq.html
Best Regards Customer Care http://www.carandtruckremotes.com http://www.newkeylessremotes.com http://www.keylessentrystore.com

 

found mine at www.programyourremote.com

and it sounds alot like what Argon is saying!
good luck