Truck Forums
once you remove the tire(s) from the vehical remove the splash guard there are some clips holding them off use a flat tip screw driver to pop them out or the actual tool to remove them i used a screw driver as it was closer to get to once removed youll see the top shock mount and bolts
once you remove the tire(s) from the vehical remove the splash guard there are some clips holding them off use a flat tip screw driver to pop them out or the actual tool to remove them i used a screw driver as it was closer to get to once removed youll see the top shock mount and bolts
0 2011/07/16 11:20:26
first losen the lugnuts on your wheel or wheels jack the truck off the ground enaugh so the tire or tires are off the ground use a jack stand to support the truck remove jack if so desired continue to remove lugnuts off wheel(s) remove tire the process is the same for the right and left side in all teh photos and descriptions
first losen the lugnuts on your wheel or wheels jack the truck off the ground enaugh so the tire or tires are off the ground use a jack stand to support the truck remove jack if so desired continue to remove lugnuts off wheel(s) remove tire the process is the same for the right and left side in all teh photos and descriptions
0 2011/07/16 11:20:26
the temp sensor on the top of the engine next to the radiator hose there is a lighter on on the bottom of the lighter is where its at
the temp sensor on the top of the engine next to the radiator hose there is a lighter on on the bottom of the lighter is where its at
0 2011/06/19 13:33:55
temp sensor on driverside engine next to the front exsaust manifold outlet
temp sensor on driverside engine next to the front exsaust manifold outlet
0 2011/06/19 13:33:55
stuck i had a better picture but i accidently deleted it from my phone also i had to high tail it outta there casue county mounty was on his way
stuck i had a better picture but i accidently deleted it from my phone also i had to high tail it outta there casue county mounty was on his way
0 2011/06/16 19:14:44
if you look real close on the right side middle you can see that i still have the stock mufflers on both sides so its not too open and quiets them down but soon they will be off and pipe will bethere
if you look real close on the right side middle you can see that i still have the stock mufflers on both sides so its not too open and quiets them down but soon they will be off and pipe will bethere
2 2011/06/11 17:49:20
again welded not clamped both sides
again welded not clamped both sides
0 2011/06/11 17:47:11
welded in place not clamped
welded in place not clamped
0 2011/06/11 17:47:11
thrush tube in place of the cats on both sides
thrush tube in place of the cats on both sides
0 2011/06/11 17:47:11
the old idle air control valve cant really see in the picture but its got a crap ton of carbon built up and also the spring is compressed and sticking to each other i did replacethis already
the old idle air control valve cant really see in the picture but its got a crap ton of carbon built up and also the spring is compressed and sticking to each other i did replacethis already
0 2011/06/05 15:52:56
this is the new exsaust manifold gasket and tbi gasket also there is some black silicone gasket maker but my dog got in the way lol i picked theese up and they will be on shortly
this is the new exsaust manifold gasket and tbi gasket also there is some black silicone gasket maker but my dog got in the way lol i picked theese up and they will be on shortly
0 2011/06/05 15:52:56
driver side cab corner thanks previous owner for not curing the cancer the right way
driver side cab corner thanks previous owner for not curing the cancer the right way
0 2011/06/05 15:52:56
driver side bed with a little rust not too bad and what apears to be a scratch and dent from a tree branch or some one keyed it
driver side bed with a little rust not too bad and what apears to be a scratch and dent from a tree branch or some one keyed it
0 2011/06/05 15:49:43
just the bed after i cleaned it out cant see in the picture but it has a wave by where the tailgate goes
just the bed after i cleaned it out cant see in the picture but it has a wave by where the tailgate goes
0 2011/06/05 15:49:43
pass side of the bed rusty but not too bad with a acouple dents in it
pass side of the bed rusty but not too bad with a acouple dents in it
0 2011/06/05 15:49:43
pass side cab corner idk whos brightidea it was to put foam thatnks previous owner for not fixing the right way
pass side cab corner idk whos brightidea it was to put foam thatnks previous owner for not fixing the right way
0 2011/06/05 15:47:16
pass side fender rusty but not to bad
pass side fender rusty but not to bad
0 2011/06/05 15:47:16
will be repalceing all the power steerign hoses when i get the money again
will be repalceing all the power steerign hoses when i get the money again
0 2011/06/05 15:47:16
just the engine
just the engine
0 2011/06/05 15:45:18
the floor mats i got from walmart mossy oaks
the floor mats i got from walmart mossy oaks
0 2011/06/05 15:45:18
the gauges
the gauges
0 2011/06/05 15:45:18
back seat
back seat
0 2011/06/05 15:43:03
driver side veiw of interior
driver side veiw of interior
0 2011/06/05 15:43:03
the new fog lights i put on cheepys from walmart cant aford kc lights just yet
the new fog lights i put on cheepys from walmart cant aford kc lights just yet
0 2011/06/05 15:43:03
the idle air control valve located on the pass side of the engine as you can see i have it unplugged it runs much better that way then like crap when i put it back on
the idle air control valve located on the pass side of the engine as you can see i have it unplugged it runs much better that way then like crap when i put it back on
0 2011/05/22 16:13:07
old fuel filter inlet side
old fuel filter inlet side
0 2011/05/19 18:44:00
this is the old fuel filter oultet side rusty rust came out of this thing when i pulled it off
this is the old fuel filter oultet side rusty rust came out of this thing when i pulled it off
0 2011/05/19 18:44:00
the power steering needs replaced will be done soon with better ones
the power steering needs replaced will be done soon with better ones
0 2011/05/19 09:11:41
just the engine clean as a whistle no leaks
just the engine clean as a whistle no leaks
0 2011/05/19 09:11:41
jsut the 5.7l v8 it still has the tube goin from the exsaust to intake
jsut the 5.7l v8 it still has the tube goin from the exsaust to intake
0 2011/05/19 09:11:41
back seat
back seat
0 2011/05/19 09:08:53
the intereior is in good condition minus teh driver seat is broke jsut needs a bolt to be fixed
the intereior is in good condition minus teh driver seat is broke jsut needs a bolt to be fixed
0 2011/05/19 09:08:53
jsut the aftermarket lights on the brush guard
jsut the aftermarket lights on the brush guard
0 2011/05/19 09:08:53
well im gonna have to wait for a while to get the grill fixed eather that or tape it for now this thing barley has any rust lots of dents but hardley anyrust i jsut put soem off road lights on the grill guard today more pictures to come the whit truck in the background is my brothers gmc 4wd z71 towpakage truck hes got 31 inch discovery cooper sttts but they are damn near and some are bald
well im gonna have to wait for a while to get the grill fixed eather that or tape it for now this thing barley has any rust lots of dents but hardley anyrust i jsut put soem off road lights on the grill guard today more pictures to come the whit truck in the background is my brothers gmc 4wd z71 towpakage truck hes got 31 inch discovery cooper sttts but they are damn near and some are bald
0 2011/05/17 21:40:24
the new truck 94 silverado 4x4 package power everything and all of it works even the cargo light for the bed thats a rare to find anymore also the service lights all work under the hood it needs the door bushings done over again as the person did it hiself not very good he didnt put the actual bushings in the wholes where they belong
the new truck 94 silverado 4x4 package power everything and all of it works even the cargo light for the bed thats a rare to find anymore also the service lights all work under the hood it needs the door bushings done over again as the person did it hiself not very good he didnt put the actual bushings in the wholes where they belong
0 2011/05/17 21:40:24
hancook dynamic m/ts with about 40% tread left and they are 31 10.50x15
hancook dynamic m/ts with about 40% tread left and they are 31 10.50x15
0 2011/05/17 21:40:24
fits like a glove sorda i need to eather get a new fender for this side or pop out the dents i think im gonna try to pop out the dents if i cant ill get a new fender
fits like a glove sorda i need to eather get a new fender for this side or pop out the dents i think im gonna try to pop out the dents if i cant ill get a new fender
0 2011/05/03 16:24:49
the grill fits like a glove and where its sposed to unlike with the old fender
the grill fits like a glove and where its sposed to unlike with the old fender
0 2011/05/03 16:24:49
new door and fender
new door and fender
0 2011/05/03 16:24:49
the new sheetmetal to fix the cab corners or the bed dont no which one yet
the new sheetmetal to fix the cab corners or the bed dont no which one yet
0 2011/05/01 18:31:21