Truck Forums
Modified cable retainer 'front'
Modified cable retainer 'front'
0 2021/04/29 14:14:31
Modified cable retainer 'rear'
Modified cable retainer 'rear'
0 2021/04/29 14:14:23
Reinstalled adapter
Reinstalled adapter
0 2021/04/29 14:14:02
Solid bead all the way around
Solid bead all the way around
0 2021/04/28 19:43:19
Applied
Applied
0 2021/04/28 19:42:34
LOCTITE EA9394
LOCTITE EA9394
0 2021/04/28 19:41:39
6061-T6 .100" thick plate. 1.5"W x 3"L
6061-T6 .100" thick plate. 1.5"W x 3"L
0 2021/04/28 19:39:28
Lapped surface with drilled holes
Lapped surface with drilled holes
0 2021/04/28 19:38:10
Raw cut surface
Raw cut surface
0 2021/04/28 19:37:31
After cut
After cut
0 2021/04/28 19:36:53
Before cut
Before cut
0 2021/04/28 19:36:25
Flow Sheet
Flow Sheet
0 2021/03/21 10:09:41
0 2021/03/21 10:09:34
0 2021/03/21 10:09:23
The blower, upside-down
The blower, upside-down
0 2021/03/18 12:18:50
The truck
The truck
0 2021/03/18 12:18:24
I have made a slight modification to the engine recently. As it was seen in previous photos, this 383 had an air filter that was WAY to small. So small in fact that it was actually being sucked shut during acceleration. SO! I got some parts from Advanced Auto and made a lil cold air intake of sorts, so I could relocate the filter location and get a bigger one. MUCH better throttle response and power... even noise!
I have made a slight modification to the engine recently. As it was seen in previous photos, this 383 had an air filter that was WAY to small. So small in fact that it was actually being sucked shut during acceleration. SO! I got some parts from Advanced Auto and made a lil cold air intake of sorts, so I could relocate the filter location and get a bigger one. MUCH better throttle response and power... even noise!
0 2011/10/04 08:32:52
Outwardly done and drivable!! There it is in my drive way. Took over a year but there it is! Put some new rubber on it.
Outwardly done and drivable!! There it is in my drive way. Took over a year but there it is! Put some new rubber on it.
0 2011/10/04 08:30:38
Is nice.
Is nice.
0 2011/10/04 08:27:40
NEW BUMPER! God those things are expensive. It's an 88 truck, but I decided to keep the new model parts theme my dad had in mind. Yes, the dual exhaust out the back is gone, I'm getting a new true dual system installed! The old one rusted off.
NEW BUMPER! God those things are expensive. It's an 88 truck, but I decided to keep the new model parts theme my dad had in mind. Yes, the dual exhaust out the back is gone, I'm getting a new true dual system installed! The old one rusted off.
0 2011/10/04 08:27:40
Cleaned up the engine a little. In this picture it still needs a lot of help.
Cleaned up the engine a little. In this picture it still needs a lot of help.
0 2011/10/04 08:27:40
Cleaned up the interior! Replaced some panels.
Cleaned up the interior! Replaced some panels.
0 2011/10/04 08:24:55
Assembled! Mostly haha This is at a friends house where it was painted. The side skirts were painted too. Matched the color of the cab pretty good!
Assembled! Mostly haha This is at a friends house where it was painted. The side skirts were painted too. Matched the color of the cab pretty good!
0 2011/10/04 08:24:55
The new GM tailgate looks good :) Used junkyard latch lol
The new GM tailgate looks good :) Used junkyard latch lol
0 2011/10/04 08:24:55
New paint for the bed!!! Woot!
New paint for the bed!!! Woot!
0 2011/10/04 08:22:56
I put Eastwood Rust Converter on the frame, all of it. I even got up under the cab and did all that all the way up to the engine. I then put new rear dampeners on and painted the rust converter over with black Rustolium paint.
I put Eastwood Rust Converter on the frame, all of it. I even got up under the cab and did all that all the way up to the engine. I then put new rear dampeners on and painted the rust converter over with black Rustolium paint.
0 2011/10/04 08:22:56
Putting Eastwood Rust Converter on the frame. The old dual exhaust rusted off.
Putting Eastwood Rust Converter on the frame. The old dual exhaust rusted off.
0 2011/10/04 08:22:56
The dormant beast. The block is original to the truck, but everything else is different. From my uncle who helped build the engine I know it was bored over .30 to make it a 383, has Eagle Specialty Products forged stroker rotating assembly (H-beam rods, flat pistons), hydraulic roller lifters, moly push rods, trick flow aulm. heads, roller rockers, comp cams camshaft (.5-.51 lift 288 dur.), stiffer springs, high flow oil pump, edelbrock performer seires valve covers, 36lb injectors, and more I just don't know about. It powers a built up 700R4 trans to a 10 bolt chevy rear-end. It used to have a B&M 144 Blower on it, but my dad must have put the TPI back on.
The dormant beast. The block is original to the truck, but everything else is different. From my uncle who helped build the engine I know it was bored over .30 to make it a 383, has Eagle Specialty Products forged stroker rotating assembly (H-beam rods, flat pistons), hydraulic roller lifters, moly push rods, trick flow aulm. heads, roller rockers, comp cams camshaft (.5-.51 lift 288 dur.), stiffer springs, high flow oil pump, edelbrock performer seires valve covers, 36lb injectors, and more I just don't know about. It powers a built up 700R4 trans to a 10 bolt chevy rear-end. It used to have a B&M 144 Blower on it, but my dad must have put the TPI back on.
0 2011/10/04 08:12:35
Interior was horrid. Over-spray and rats nest EVERYWHERE. Not to mention its just a mess.
Interior was horrid. Over-spray and rats nest EVERYWHERE. Not to mention its just a mess.
0 2011/10/04 08:07:45
Back Side. No tailgate, but a new Genuine GM tailgate is in the bed there. No bumper, was stolen.
Back Side. No tailgate, but a new Genuine GM tailgate is in the bed there. No bumper, was stolen.
0 2011/10/04 08:07:45
This is where the truck sat for over 12 years. My dad hit a deer with it and decided to use that as an excuse to put newer model front end parts on it, and repaint it... again. You can see how beat up it is. Bed isn't even bolted.
This is where the truck sat for over 12 years. My dad hit a deer with it and decided to use that as an excuse to put newer model front end parts on it, and repaint it... again. You can see how beat up it is. Bed isn't even bolted.
0 2011/10/04 08:07:45