"YEAH, IT'LL BEAT A HEMI." stickers...
Thread Starter
|
Senior Member
Joined: Jun 2007
Posts: 408
From:
"YEAH, IT'LL BEAT A HEMI." stickers...
TruckForum Addict
Joined: Jan 2007
Posts: 1,021
RE: "YEAH, IT'LL BEAT A HEMI." stickers...
And Here is your instructions hope this helps.
EASY 3-STEP PURCHASE:
1.) HIGHLIGHT AND COPY THE BLUE TEXT:
I WOULD LIKE TO PURCHASE THE FOLLOWING:
NUMBER OF STICKERS:
AMOUNT DUE ($10 EACH):
I SAW THESE ON THE FOLLOWING SITE:
MY MEMBER NAME ON THAT SITE IS:
I WILL MAKE PAYMENT BY (PayPal, Cash, Money Order, Cashiers Check):
MY NAME AND SHIPPING ADDRESS IS:
2.) CLICK ON THE LINK AT THE END OF THIS SENTENCE AND PASTE THE COPIED TEXT INTO YOUR EMAIL (moze@ls1truck.com)
3.) SEND PAYMENT BY PREFERRED METHOD (SEE COMMENTS BELOW)
PLEASE READ THE FOLLOWING:
When you type your address, be PRECISE. I am NOT responsible for lost mail.
I accept ONLY the following forms of payment: PayPal, Cash, Money Order, or Cashiers Check.
If you want to send cash, feel free to fold it in a piece of paper and mail it to me. I've sold quite a few this way with no issues.
Payment via PayPal can be made to (moze@ls1truck.com). After sending the above email, you do not have to wait to hear from me to send a payment via PayPal.
If you send a Money Order or Cashiers check, P.M. me and I will give you my mailing address. The sticker(s) will NOT be shipped until I have cashed the M.O. or C.C.
Stickers are digitally printed, individually cut logos and letters.
There is not a solid black background on the logo like on previous stickers.
APPLICATION PROCESS:
1.) Clean install location thoroughly.
2.) Without removing the transfer paper (the top, thin, layer) align the sticker in the desired location.
3.) Vertically tape the right edge of the sticker to the window to act as a "hinge" and maintain alignment (it's easiest to keep the tape length shorter than the height of the sticker).
4.) With moderate pressure, carefully rub the surface of the transfer paper with a paper towel to help the letters adhere to the transfer paper.
5.) Peel off the backer sheet, separating it from the transfer paper. Be sure the vinyl is sticking to the thin transfer paper, NOT the thicker backer sheet. If a piece does not stick to the transfer paper, carefully put the transfer paper and backer sheet back together and rub on the transfer paper where the vinyl isn't releasing. You likely will not have to do this though. Typically the vinyl adheres pretty well to the transfer paper.
6.) With the backer material removed, carefully lay the transfer paper against your install surface and rub briskly with a paper towel.
(NOTE: You will need to first install the white vinyl (the eyes and the text). Next, simply align the red logo with the white eyes using the method described above. This is fairly simple, however in some instances, it may be easier to shine a light from the opposite side of the glass so the white eyes are clearly visible.)
FINISHED!
EASY 3-STEP PURCHASE:
1.) HIGHLIGHT AND COPY THE BLUE TEXT:
I WOULD LIKE TO PURCHASE THE FOLLOWING:
NUMBER OF STICKERS:
AMOUNT DUE ($10 EACH):
I SAW THESE ON THE FOLLOWING SITE:
MY MEMBER NAME ON THAT SITE IS:
I WILL MAKE PAYMENT BY (PayPal, Cash, Money Order, Cashiers Check):
MY NAME AND SHIPPING ADDRESS IS:
2.) CLICK ON THE LINK AT THE END OF THIS SENTENCE AND PASTE THE COPIED TEXT INTO YOUR EMAIL (moze@ls1truck.com)
3.) SEND PAYMENT BY PREFERRED METHOD (SEE COMMENTS BELOW)
PLEASE READ THE FOLLOWING:
When you type your address, be PRECISE. I am NOT responsible for lost mail.
I accept ONLY the following forms of payment: PayPal, Cash, Money Order, or Cashiers Check.
If you want to send cash, feel free to fold it in a piece of paper and mail it to me. I've sold quite a few this way with no issues.
Payment via PayPal can be made to (moze@ls1truck.com). After sending the above email, you do not have to wait to hear from me to send a payment via PayPal.
If you send a Money Order or Cashiers check, P.M. me and I will give you my mailing address. The sticker(s) will NOT be shipped until I have cashed the M.O. or C.C.
Stickers are digitally printed, individually cut logos and letters.
There is not a solid black background on the logo like on previous stickers.
APPLICATION PROCESS:
1.) Clean install location thoroughly.
2.) Without removing the transfer paper (the top, thin, layer) align the sticker in the desired location.
3.) Vertically tape the right edge of the sticker to the window to act as a "hinge" and maintain alignment (it's easiest to keep the tape length shorter than the height of the sticker).
4.) With moderate pressure, carefully rub the surface of the transfer paper with a paper towel to help the letters adhere to the transfer paper.
5.) Peel off the backer sheet, separating it from the transfer paper. Be sure the vinyl is sticking to the thin transfer paper, NOT the thicker backer sheet. If a piece does not stick to the transfer paper, carefully put the transfer paper and backer sheet back together and rub on the transfer paper where the vinyl isn't releasing. You likely will not have to do this though. Typically the vinyl adheres pretty well to the transfer paper.
6.) With the backer material removed, carefully lay the transfer paper against your install surface and rub briskly with a paper towel.
(NOTE: You will need to first install the white vinyl (the eyes and the text). Next, simply align the red logo with the white eyes using the method described above. This is fairly simple, however in some instances, it may be easier to shine a light from the opposite side of the glass so the white eyes are clearly visible.)
FINISHED!
Thread
Thread Starter
Forum
Replies
Last Post
superdave777
Chevy Silverado/ GMC Sierra Forum
1
Oct 10, 2007 01:43 PM
DamnYankee
Automotive Parts for sale
0
Jun 16, 2007 04:19 PM
