Leveling your truck.

Reply Subscribe

Thread Tools

Search this Thread

Jul 11, 2015 | 04:40 PM

#11

Rusty Steel

Thread Starter

Junior Member

Joined: Jul 2015

Posts: 50

From: Memphis

Quote:

Originally Posted by primem

spin the a/c tensioner and make sure its not worn, noisy or seized. turn the compressor by hand and spin the pulley. the compressor should have some compression resistance and the pulley should spin freely. If its good, replace the belt and see if the compressor cycles on. if no... check the refrigerant level.

junk yard part the major parts of a/c system the whole way. there are tons of these trucks in the bone yard. anything from 1999 to 2006 should fit

Thanks for the reply, I've been down for a few days, went down on my bike Wednesday night, first time in about 30 years.(not my fault). Anyway, there is no pressure in the lines. And, fortunately there are a few good GM junk yards around here. It will be a work in progress for a while, as I'm a little financially challenged.