New truck *99 silverado 5.3
#13
also im taking the exhaust system off my old truck and putting it on my new one and im going to run the 4.8 on straight headers just to see what shes got. ill make a video
Also im going to undo the ball flange but the bolts are really on there...any tips to get those buggers off?
Also im going to undo the ball flange but the bolts are really on there...any tips to get those buggers off?
#14
yes i do get some pb blaster spray teh hell out of it and if you can get a impact on it with a wrench on the other side of corse
also you can use a small propane torch to heat it up
or you can use a wrench as a cheater pipe if you cant get any of them things to work i cant explain how to make a wrench into a cheater wrench but its where you take the wrench your useing on the bolt nut or whatever
and then take another wrench and use it as a lever to help break em loose
but if you use the pb blaster let it soak for a while
then once you get the bolts or nuts off clean them with a wire brush most likely someone put antisieze or lock tite on them
also you can use a small propane torch to heat it up
or you can use a wrench as a cheater pipe if you cant get any of them things to work i cant explain how to make a wrench into a cheater wrench but its where you take the wrench your useing on the bolt nut or whatever
and then take another wrench and use it as a lever to help break em loose
but if you use the pb blaster let it soak for a while
then once you get the bolts or nuts off clean them with a wire brush most likely someone put antisieze or lock tite on them
#19
Well i tried to undo the ball flange with PB blaster a torch and a wrench and both those bastards snapped off :/ but it sounds nice lol
i also did alot today though (pictures will be below)
i also did alot today though (pictures will be below)
#20
SNAPPED
2011-07-16_19-59-37_596.jpg?t=1310863415
GOT THE WHOLE SYSTEM OFF AND COATED IT IN HIGH TEMP RUST PROOF PAINT AND THATS A 4 INCH TIP
2011-07-16_12-25-42_608.jpg?t=1310863463
SWAPPED CABIN FILTER HEADLIGHTS AND RIMS
2011-07-16_19-58-52_942.jpg?t=1310863633
2011-07-16_20-10-37_475.jpg?t=1310863682
2011-07-16_20-12-50_940.jpg?t=1310863913
GAVE HER A GOOD WAX
2011-07-16_20-10-47_595.jpg?t=1310863731
THERES THESE FADE SPOTS ON THE TRUCK...ANYONE KNOW HOW TO FIX THEM?
2011-07-16_20-13-02_268.jpg?t=1310863949
A QUICK VIDEO OF EXHAUSTS
2011-07-16_19-59-37_596.jpg?t=1310863415
GOT THE WHOLE SYSTEM OFF AND COATED IT IN HIGH TEMP RUST PROOF PAINT AND THATS A 4 INCH TIP
2011-07-16_12-25-42_608.jpg?t=1310863463
SWAPPED CABIN FILTER HEADLIGHTS AND RIMS
2011-07-16_19-58-52_942.jpg?t=1310863633
2011-07-16_20-10-37_475.jpg?t=1310863682
2011-07-16_20-12-50_940.jpg?t=1310863913
GAVE HER A GOOD WAX
2011-07-16_20-10-47_595.jpg?t=1310863731
THERES THESE FADE SPOTS ON THE TRUCK...ANYONE KNOW HOW TO FIX THEM?
2011-07-16_20-13-02_268.jpg?t=1310863949
A QUICK VIDEO OF EXHAUSTS
Last edited by Wiked; 07-24-2011 at 09:33 PM.