Give 'er a good power wash and degreaser bath and paint it!
|
Originally Posted by NullHead
(Post 74203)
Give 'er a good power wash and degreaser bath and paint it!
|
3 Attachment(s)
Pulled the grill, lights, inner fenders, battery, rad. overflow, and battery tray today. I didn't work real long didn't want to do any more because i didn't have the engine lift and didn't want it to get rained or snowed on to make it a big PITA to work on tomorrow.
I just went and picked up the engine lift so tomorrow i plan on pulling the motor and trans. Attachment 2030 Attachment 2031 Attachment 2032 |
4 Attachment(s)
Today i pulled the fenders, core support, and rad.
The unplugged all the wires and unbolted the motor and pulled it. Took the trans off and took it to my buddy so i could get the one i needed for the np205 but i kept my clutch since its only a few months old. Attachment 2026 Attachment 2027 Attachment 2028 Attachment 2029 |
Cool stuff! How much power do you think that engine puts out? Is it built up at all?
|
Originally Posted by NullHead
(Post 74234)
Cool stuff! How much power do you think that engine puts out? Is it built up at all?
Edelbrock performer intake crane energizer cam holley 650 carb. I dont know if there is anything else or not i know it runs surprisingly well for just being a mild 350, but i havent decided weather to do some more work to this or try and find something different. I would really love to pick up a big block cheap and build it instead, but i might just built this one up i might even just run it as is for a while. |
Or turn it into a 383 stroker!
|
Originally Posted by NullHead
(Post 74237)
Or turn it into a 383 stroker!
|
1 Attachment(s)
Haven't been able to get much done lately its been snowing and raining and cant make up its mind on what it wants to do. Only thing i got done today was pulling the glass out of the new truck then it started raining, i figure since the glass is good i might as well keep it.
Attachment 2005 |
3 Attachment(s)
So it wasnt raining today and the ground was froze up for a little bit figured i would pull the cab off.
The frame is a little nicer than i even first thought the only problem though is the rear crossmember that the cab mounts too the one side is rotted enough that it didnt do anything but im looking for a good one now. Attachment 2002 Attachment 2003 Attachment 2004 |
All times are GMT -5. The time now is 02:02 AM. |
© 2024 MH Sub I, LLC dba Internet Brands