hey guys , i just recently purchased a 383 stroker for my regular cab shortbox chevrolet full size,,,,the truck is a 97 with a 4.3 fuel injection motor in it...im wondering what all i will need to make this conversion happen,,,,my main concern is going from fuel injection to carb.. i have an HEI Msd distributor already and im wondering about the wiring...I know my fuel pressure needs to be regulated and i have that covered already. Its just the wiring for the distributor im concerned about.....the motor itself is blueprinted and balanced eagle crank ,eagle connecting rods,,,pistons in there as well,,,edelbrock performer rpm heads comp cam and lifters edelbrock intake ,,670 holley carb,,hooker headers....Im told the wiring might be quite simple but im unsure,,having never done it before.. Any help would be appreciated.