Has Anyone EVER Had This Problem!?!
#1
Has Anyone EVER Had This Problem!?!
Ok, I have never heard of this happening before, so i was wondering if somebody can help me. So, out of nowhere, my ignition switch wouldnt go to start. It would trun to all the way to the "ON" position but wont do the extra trun to START. I tried shifting it to N and back to park, giggling it, moving the steering wheel. all kinds of stuff. what else could it be? My only choice to get home was to set it in the "ON" position and had my friend(cause i wasnt about to do it) get under it with a screw driver and start it from the starter and it started right up. Any ideas?
#2
RE: Has Anyone EVER Had This Problem!?!
Something broken in the ignition assembly lockout would be my guess. Probably have to replace it, or open it and remove the lockout. More risky to do that (might foget and try to start with truck running), but would get you home without the screwdriver.
#3
RE: Has Anyone EVER Had This Problem!?!
thanks smoke, but naw, it was the ignition cylinder. for some reason it wont turn the whole way. i already replaced it with a new with and new keys and its fine. so if this happens to anyone else. check that out. thanks
[sm=closed.gif][sm=closed.gif][sm=closed.gif]
[sm=closed.gif][sm=closed.gif][sm=closed.gif]
Thread
Thread Starter
Forum
Replies
Last Post
cubpak89
Chevy Silverado/ GMC Sierra Forum
4
09-08-2011 07:39 PM
Wiked
Chevy Silverado/ GMC Sierra Forum
8
06-09-2011 03:13 PM
nick
Chevy Silverado/ GMC Sierra Forum
2
11-02-2005 04:56 AM