Instrument Cluster Change
Drop the steering wheel all the way down. Pull the shift lever down into 1st. (You'll need the key) Pull the dash front cover off by pulling gently at the edges. There is four bolts holding the intrument cluster in the dash (maybe more but Im pretty sure its four). Gently pull it forward and try not to smack it off the steering wheel. Don't pull too far as you will need to disconnect the wiring harness. Now you can pull the back off the cluster to access the bulbs.
FYI: If you have bulbs out try cleaning the contacts on the board, I had two out and now they work.
FYI: If you have bulbs out try cleaning the contacts on the board, I had two out and now they work.
Thread
Thread Starter
Forum
Replies
Last Post
oldchevylover
Chevy Silverado/ GMC Sierra Forum
0
Dec 14, 2009 01:08 PM
jstill
Chevy Silverado/ GMC Sierra Forum
2
Dec 12, 2008 02:31 PM
HSV_Madman
Chevy Silverado/ GMC Sierra Forum
5
Jan 30, 2008 09:14 PM




