i have 6.0lq4 with lt pacesetters headers, knn intake and tune with a 4l60e tranny stock gears i was wondering what heads and cam would go perfect together

 

Depends on how you drive the truck. Is it a daily driver or weekend warrior?

 

its more of a daily driver right now i was looking into l92 heads but not really good with cam info but in total i think i just drive my truck about 100 miles in total per week and than to the track on weekends that about it

 

o and hopefully if plans go right gonna put a 4l80 tranny in

 

Yeah I was gonna say your gonna need to either get your tranny built or put a 4L80E in there. The L92 heads have been the best choice for flow. For the cam I would look into something like a TR224. Its got lots of torque and pulls hard up top. But you can still daily drive it without any problems. On a 6.0 with this cam, headers, and a tune, your gonna see about close to 100 hp increase.

 

dang thats a lot of hp i like the sound of that and how would my 1/4 time be looking so far right now with my setup im hitting about 13.8

 

That all depends on weight of the truck and gearing. But I bet you could get it down close to a low 13. All this with a added torque converter you should be screamin off the line pretty hard.

 

Here's a slightly smaller cam but this is for a 5.3... http://www.ls1truck.com/forums/front...in-budget.html

 

thanks for the info and that 5.3 cam on the chart looked very good it hp gain

 

Welcome. I've got the same cam in my truck, but I'm gonna go bigger so I may wind up selling it for cheap.