Needing some help here... STUMPED!!!
#21
07-02-2011, 07:18 AM
Yeah a broken pin would definitely cause some issues. I thought the TPS only had 3 pins though.
Last edited by Mr_Shamrock; 07-02-2011 at 07:20 AM.
#22
07-02-2011, 11:10 AM
Join Date: Jun 2011
Location: Middle of nowhere, Nebraska
Posts: 24
Wow, I'm a dumbass... It's the IAC valve. The TPS sensor is mounted in front of the IAC on this throttlebody. Oh well, probably need a new TPS as well. Cleaned the crap out of the TB and the chemicals more than likely got into both sensors.
Last edited by 2oCHEVYo0; 07-03-2011 at 10:41 AM.
#23
07-04-2011, 04:19 AM
Join Date: Jun 2011
Location: Middle of nowhere, Nebraska
Posts: 24
Well, today I went out and bought a new Throttle Position Sensor and an Idle Air Control Valve and for the most part it runs GREAT now! I took it out and drove it and it ran pretty great for the most part. The SES light is off and gets up and goes just fine. The only thing is it kind of acts up a little bit when putting around. Next things on the list of things to do would be to check/replace the fuel filter, new O2 sensor and possibly the knock sensor. Other than that things are just peachy 
Thanks for the help peeps!
Thanks for the help peeps!
Thread
Thread Starter
Forum
Replies
Last Post
95chevyssbcb
Chevy Silverado/ GMC Sierra Forum
11
02-29-2012 10:44 PM
